Product Introduction
Features & Benefits
Availability
- Microprocessor-based line interactive design for fast response to power disturbances
- Programmable load bank disconnects non-critical loads when a blackout occurs and reserves more battery power for critical loads
- Automatic voltage regulator (AVR) delivers stable output voltage during brownouts or over-voltages
- Wide input voltage range allows the UPS to work in harsh electrical environments
- Hot-swappable battery design to protect equipment during battery replacement
- Supports both rack and tower installation
- Excellent management through a user-friendly graphical and easy-shift LCD display to suit different installation format
- Supports multiple communication interfaces, including USB port, RS-232, Mini Slot, Surge Protection, REPO for enhanced monitoring and manageability
Low Total Cost of Ownership
- Output power factor is up to 0.9 to provide more real power to critical loads
- High efficiency normal mode reach at 98% and 98.5% for 3kVA
- Wide input range and protection against over voltage prolongs battery life
Applications
Model
MX-1.1K / MX-2K / MX-3K
Power Rating
MX-1.1K: 1100 VA / 990 W
MX-2K: 2000 VA / 1800 W
MX-3K: 3000 VA / 2700 W
Input
Voltage Range
200 Vac: 150-234 Vac
208 Vac: 156-243 Vac
220 Vac: 162-268 Vac
230 Vac: 170-280 Vac
240 Vac: 177-290 Vac
Nominal Frequency: 50/60 Hz (Auto-Detection)
Connection
MX-1.1K: IEC C14
MX-2K: IEC C20
MX-3K: IEC C20
Phase: Single phase with ground
Output
Voltage: 200/208/220/230/240 Vac
Voltage Regulation (Batt. Mode): ± 1.5%
Frequency Range (Batt. Mode): 50/60 Hz ± 1 Hz
Connection
MX-1.1K: IEC C13 (4+4)
MX-2K: IEC C13 (4+4)
MX-3K: IEC C13 (4+4), IEC C19 x 1
Overload
103~120%: 5 minutes (1 minute @ Battery mode),
120~150%: 10 seconds,
> 150%: UPS shutdown immediately
Current Crest Ratio: 3:1
Harmonic Distortion
Linear load (full load) ≤ 2%; Non-linear load (full load) ≤ 5%
Waveform (Batt. Mode): Pure Sinewave
Battery
Battery Type : 12 V / 9 Ah, Sealed lead-acid battery
Numbers
MX-1.1K: 2
MX-2K: 4
MX-3K: 6
Recharge Time: 4 hours recover to 90% capacity
Interface
Standard: RS-232 Port x 1, USB Port x 1, MINI Slot x 1, Surge Protection, REPO
Efficiency
Normal Mode
MX-1.1K: 98%
MX-2K: 98%
MX-3K: 98.5%
AVR Mode
MX-1.1K: 96.5%
MX-2K: 96.5%
MX-3K: 96.5%
Environment
Operating Temperature: 0~40°C
Relative Humidity: 20~90% RH (non-condensing)
Noise Level
MX-1.1K: < 45 dBA
MX-2K/3K: < 45 dBA @ Normal mode, < 55 dBA @ Battery mode
Physical
Dimensions (W x D x H)
MX-1.1K: 438 x 410 x 88 mm
MX-2K: 438 x 510 x 88 mm
MX-3K: 438 x 630 x 88 mm
Net Weight
MX-1.1K: 14.1 kg
MX-2K: 21.3 kg
MX-3K: 32.1 kg
-----------------------------------------------------------------------------------------
Runtime Table
Download MX Series UPS, 1.1/2/3 kVA (Leaflet)
